---
slug: erste-conversion-testen
title: "How do I test my first conversion?"
category: einstieg
locale: en
updated: 2026-10-15
keywords: ["test","conversion","live test","verify","test data","metrunio-test"]
questions: ["How do I check that a conversion arrives correctly?","How do I test tracking?","How do I trigger a test conversion?","Is my conversion tracking working?","What is the metrunio-test campaign?"]
url: https://bench.metrunio.com/en/help/erste-conversion-testen
---

# How do I test my first conversion?

**How do I check that a conversion arrives correctly?**

The setup assistant has a step called “Run a test conversion”. It creates a test purchase with a test visit before it, both stored as test data: they appear immediately in the live checklist, the journey shows an attributed touchpoint, and they stay excluded from standard reports.

1. Open “Setup” and go to the step “Run a test conversion”.
2. Click “Trigger test conversion”. Metrunio sends a test visit with the campaign “metrunio-test” and, one minute later, a test purchase of €99, both as test data.
3. Watch the live checklist: “Conversion received” and “Journey created” must appear.
4. Check the journey under “Customer journeys”; “Show test data” switches the list to test data.
5. Reset the test data before you go live.

To verify your own shop end to end, place an order in test mode as well: set testMode: true in the SDK, or send the server event with environment: "test".

Funnel steps of an application are checked under “Orders & goals”: “Send test step” on a step creates a test event that counts immediately as a conversion of that step, in the test data and not in the reports.

> **Note:** The test visit is only an example so you can see what an attribution looks like; it never appears in production data. If a real order shows the conversion but without a measured touchpoint before it, and therefore unattributed, a shared identifier between website and shop is usually missing. The article “Why is a conversion not attributed?” lists the possible causes.

## Also asked

- How do I test tracking?
- How do I trigger a test conversion?
- Is my conversion tracking working?
- What is the metrunio-test campaign?

## Related

- https://bench.metrunio.com/en/help/testdaten-zuruecksetzen
- https://bench.metrunio.com/en/help/warum-keine-pageviews
- https://bench.metrunio.com/en/help/health-center
- https://bench.metrunio.com/en/help/funnel-schritte-einbauen